NEWS / BLOG
Sed interdum massa lacus, a porttitor risus gravida sed. Nulla ultricies ex non sagittis vulputate. Integer fringilla convallis risus, id semper est interdum non.
LATEST ARTICLES
Quisque molestie tristique nisi et luctus. Proin eget velit quis lorem euismod pulvinar. Phasellus lobortis tellus dignissim metus varius volutpat. Integer a lacus mauris.
COALMASTER HOSE
Parker FRAS Mining Hose is made from a lightweight, highly abrasion resistant,high technology thermoplastic polymer which was developed especially for use in the mining industry. Parker FRAS conforms to AS 2660 class A, and AS/NZS 2554 class A, and is suitable for the most arduous mining and industrial applications. The product is flame resistant and antistatic.High working pressure of 305psi with a 4:1 safety factor. Also available in 25mm is the higher rated working pressure option of 500psi (refer FSX series) Applications: • Air / Water transfer • Suitable for underground coal mines Download Catalog Here
VELCON DIESEL FILTRATION
Diesel Filtration Skid DFS™ Series Combining Particulate Filtration with Water Coalescing Providing high quality fuel to the modern high pressure common rail fuel injection systems is imperative to avoid costly downtime and engine repair. The Velcon Diesel Filtration Skid (DFS) plays an important role in a comprehensive fuel contaminant control program as it provides fuel conditioning to assure the consistent removal of abrasive particles and damaging water. The DFS offers a complete fuel filtration solutions which incorporates both particulate and water contaminant removal technologies mounted on a skid base that can be quickly installed and put into operation. Key components of the DFS includes filter (DVF) and coalescing (DV) housings which have proven to withstand years of service in the most challenging environments. Velcon DFO particulate filters and DI and DSO coalescer and separator cartridges are used for conditioning contaminated fuels to meet the most stringent ISO 4406 and ASTM D975 standards for emulsified and free water as well as abrasive particulate. All filtration cartridges are available with threaded base endcap option for quick filter removal and ease of installation. Models Available [...]
BALDWIN FUEL FILTER
Baldwin lube filter spin-ons protect your engine from wear particles that can otherwise lead to premature parts failure. Longer drain intervals requires filters that have both high capacity and the ability to withstand the rigors of time and temperature without failing or going into bypass. Baldwin's lube filters are up to the challenge. Application : Hitachi Equipment Compatible Competitor Part Number : Hitachi 4206079 Brand : Baldwin Industry : Automotive Heavy-duty on-highway transportation Commercial trucks and buses Agriculture Construction Industrial Marine Mining Oil & Gas Power Generation Product Style : Lube Filter Technology : Filtration Download Catalog Here
Diaphragm Accumulator – DA Series
Parker DA series diaphragm / membrane accumulators are inexpensive, compact, lightweight, low maintenance and ideally suited where weight and space is an important consideration. They were formerly known as ‘ELM’ diaphragm accumulators. They offer a reliable and efficient solution for storing energy under pressure and work as a hydraulic ‘spring’. Parker DA accumulators are gas-loaded with separation between the liquid and gas sides achieved by a flexible diaphragm. They are available in 2 elastomer mixes: Nitrile and Hydrin (for low temperature working conditions) with a maximum pressure of 350 bar (up to 2.8 litres) and volume of 3.5 litres (up to 250 bar). Parker DA accumulators come with a bonded seal (BS) fluid port with female or male and female fluid connection and M28 x 1.5 gas connection. Technical specifications: Gas volume up to 3.5 litres Maximum operating pressure up to 350 bar High compression ratio – up to 8, according to type Certificates: PED 2014/68/EU or Article 4.3 Valve, gas side: nitrogen rechargable M28 x 1.5 Valve, oil side: female 1/2″ BSP or 3/4″ BSP | female 1/2″ BSP and male [...]
AUTOCLAVE VALVE
Parker Autoclave's VRMM Series micro-metering valves are designed for applications where more precise control of small flows is required than is possible with a standard regulating stem. Barrel and Thimble micrometer design permits settings to be repeated. Metering is effected by a finely tapered stem acting in a precisely mated replaceable seat. Very fine stem position is achieved utilizing a 40 TPI thread. The Barrel and Thimble are set for proper metering at the factory. These valves are designed for metering only and cannot be used as a shutoff valve. Minimum flow is factory set and occurs at “0” position. DO NOT OPERATE THE VALVE BELOW THE ZERO POSITION OR DAMAGE WILL RESULT. When shutoff action is required, a correlated shutoff valve from Parker AE series 10V, 30VM or 60VM should be installed in series with the micro-metering valve. Technical Specifications Body Material : 316 Stainless Steel Body Type : 2-Way Angle Tube Size : 1/4" Cone and Thread Maximum Working Pressure (psi) : 30, 000 Stem Type : Reg Brand : Autoclave Technology : Process Control Application : High Pressure Fuid [...]
BLADDER ACCUMULATOR – EHV SERIES
The EHV bladder accumulator offers a reliable and efficient solution for storing energy under pressure. Utilizing comprehensive tools and resources including an applications database, CAD/CAM, finite element analysis, reliability studies and simulation we have optimized the design and performance of the accumulator. Parker Olaer bladder accumulators are suitable for use in more than 35 countries (all hydraulic accumulators for Europe are CE marked) and they can meet an extensive range of international and industry approvals. Rigorous product testing and continuous product development help to ensure our hydraulic accumulators operate at optimum efficiency and can perform in the most demanding environments. Parker accumulator accessories such as Safety Blocks, Burst Discs and Permanent Charging Sets, can aid the safe installation and operation of the accumulators in any hydraulic system. Volume : 0.2 to 57 Liters Pressure : 330 to 690 bar Shell Material : Shell carbon steel with primar coating , fluid port and stem valve cabrbon steel zinc plated. Optional other materials Bladder Materials : Various bladder materials available which are compatible with a wide range of fluids and temperatures. Fluid Port : [...]
QUALITY GUARANTEE
Sed venenatis urna sit amet vulputate lobortis. Nullam dolor sem, varius eu luctus vitae, mattis id dolor. Proin ultricies feugiat ipsum. Quisque lobortis risus sapien, quis pulvinar turpis placerat ut. Vivamus eu egestas est, commodo ultricies turpis. Donec a consequat nisi, non pellentesque risus. Fusce lacinia sem a mollis tempus. Etiam in sapien non odio ornare iaculis vel vel enim. Sed velit urna, pharetra non quam nec, consequat hendrerit ex. Phasellus ac rutrum diam.
FREE QUOTE
Do you need help with hydraulic maintenance? Fill out this form to get in touch.
OFFICE LINE
1.800.555.6789
EMERGENCY
1.800.555.0000
WORKING HOURS
9:00am – 6:00pm
OFFICE LINE
1.800.555.6789
EMERGENCY
1.800.555.0000
WORKING HOURS