GEROTOR TG

The heart of Parker’s TG Series powertrain, the drive link, is an extra heavy duty part that includes unique 60:40 spline geometry. Rugged construction throughout allows the transmission of up to 13,000 lb-in of torque. The entire powertrain is continually washed in cool, high flow fluid to assure long life. Roller vanes and sealed commutator maintain high efficiency and provide smooth low speed performance.

Performance data based on testing using 10W40 oil with a viscosity of 200 SUS at 54° C (130° F.). Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l’huile 10W40 d’une viscosite de 200 SUS a 54°C (130°F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d’un moteur de production a l’autre. Leistungsdaten sind gemessen mit SAE 10W40 bei einer Viskositaet von 43,1 Cst bei 54oC. Geringfuegige Abweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 10W40 de 200 SUS de viscosidad a 54°C (130°F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores.

Download Catalog Here

COMMERCIAL GEAR PUMP BUSHING

Parker’s PGP330 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction, making them ideal for high duty cycle mobile applications for the Construction, Foresty, and Oil & Gas markets. They are available as a standart pump, clutch pump, and tandem pump.

Technical Specifications :

  • Flow range to 40 gpm (151 lpm) per section
  • Displacements from .985 to 3.94 cir (16 to 65 cc/rev)
  • Operating pressures up to 241 bar (3,500 psi)
  • Speeds up to 3,000 rpm
  • Volumetric efficiencies up to 98%
  • CW, CCW, and BI-rotational pumps available
  • SAE and SI shafts, flanges and porting available
  • Multiple section, as well as Cross frame add-a-pumps
  • Extensive integrated valve capabilities

Download Catalog Here

COMMERCIAL GEAR PUMP BEARING

Parker’s 031 series fixed/positive displacement gear pumps offer high durability & resistance to oil contamination due to their cast iron, roller bearing construction, making them an ideal selection for the Vocational Truck, Winch, and Oil & Gas markets. They are available as single or multi-section pumps with an integral valve.

Technical Specifications: • Flow range to 38.4 gpm (145.4 lpm) per section • Displacements from .985 to 3.94 cir (16.2 to 64.6 cc/rev) • Operating pressures up to 200 bar (3,000 psi) • Speeds up to 2,400 rpm • Volumetric efficiencies up to 95% • CW, CCW, and Bi-rotational pumps available • SAE and SI shafts, flanges and porting available • Multiple section • Extensive integrated valve capabilities - Relief with anti-cavitation check - Priority flow control - Unloader valves - Accumulator charge (single and dual) - Two-speed valves (winches, ground drives) - Load sense priority flow divider (bolt-on) - Dry valves, HOC™ (hydraulic overspeed control), flow controls - Crossover relief valves

Download Catalog Here

ICOUNT PARTICLE DETECTOR

Hydraulic fluid cleanliness plays a critical role in the performance and reliability of industrial equipment. Fluids with high levels of contamination and/or solid particulate matter can damage system components, such as pumps, actuators, or servo valves, leading to shorter maintenance intervals, added downtime, and increased costs.

The iCountPD from Parker is a highly compact, permanently mounted laser detection particle monitor designed for continuous monitoring of contamination and solid particulate levels in hydraulic fluid systems. The device represents the most up to date technology in solid particle contamination analysis and serves as a cost-effective solution to fluid management and condition monitoring in applications ranging from construction machinery, to industrial plant equipment, to test rigs. The iCountPD is available in three configurations to meet the unique requirements of customers’ applications. Options include: Standard iCountPD – The standard iCount PD is designed for test stand, flushing skids, filter carts and other industrial applications.

iCountPDR – The iCountPDR is designed for mobile equipment or any outside use other than hazardous environment.

iCountPDZ – The iCountPDZ is suited for applications that require a ATEX Zone II safety such as off-shore platforms or any other hazardous environment. For Zone I applications, the standard iCountPD can be used within a NEMA7 enclosure.

All iCountPD models feature an LED display, which uses three sets of lights for the indication of ISO 4406 / AS4059 and NAS1638 code figures. Individual code lights will trigger based on the customer settings. A moisture sensor is an option that can be included when specifying the icountPD. The moisture sensor reports on the saturation levels of the fluid passing through the sensing cell. The output is a linear scale, reporting within the range of 5% saturation to 100% saturation Increased flexibility is provided by an intuitive flow control device that fits on the downstream (outlet) side of the icountPD. The device is fitted with a differential pressure valve that adjusts the system flow to a range inside the icountPD specifications. The flow control device will operate correctly between 10.3 bar (150 psi) and 200 bar (2900 psi) and the return back to an open system of 0 bar.

Features: •Warning LED or digital display indicators for Low, Medium and High contamination levels. •Visual indicators with power and alarm output warnings. •Moisture %RH indicator (optional). •Fuel, Hydraulic and phosphate Ester fluid compatible construction. •Self diagnostic software. •Full PC/PLC integration technology such as: RS232 and 0-5Volt, 4-20mA, CAN(J1939) (Contact Parker for other options). •Set up and Data logging support software included •Online Flow Range via System 20 Inline Sensors (Hydraulic systems only): Size 0 = 6 to 25 L/min - (Optimum Flow = 15 L/min) Size 1 = 24 to 100 l/min - (Optimum Flow = 70 l/min) Size 2 = 170 to 380 L/min - (Optimum Flow = 250 L/min) •Temperature: Ambient storage temperature -20°C to +40°C (-4°F to +104°F); Environment operating temperature +5°C to +60°C (+41°F to +140°F); Fluid operating temperature +5°C to +80°C (+41°F to +176°F)

Download Catalog Here

F11/F12 MOTOR

Parker F11 hydraulic motor series has operating pressures up to 420 bar (6,100 psi) and speeds up to 14.000 rpm. The F11 motor is a robust design motor, and can be used in numerous applications in both open and closed loop circuits. Sizes from 5-19 cc.

Parker F12 hydraulic motor series has operating pressures up to 500 bar (7,250 psi) and speeds up to 7.300 rpm. The F12 motor is a robust design motor, and can be used in numerous applications in both open and closed loop circuits. Sizes from 30-250 cc.

Series F11
F11 is a bent-axis, fixed displacement motor/pump. It
can be used in numerous applications in both open and
closed loop circuits.
The F11 series is available in sizes 5, 6, 10, 12, 14 and
19 cc.

F11 Features
• Max intermittent pressure up to 420 bar and
continuous operating pressure up to 350 bar
• Thanks to low weight pistons and a compact design of
the rotating parts, the F11 tolerates very high speeds,
up to 14000 rpm
• CETOP, ISO, SAW and SAE versions

Series F12
F12 is a bent-axis, fixed displacement motor/pump. It
can be used in numerous applications in both open and
closed loop circuits.
The F12 series is available in sizes 30, 40, 60, 80, 90,
110, 125, 152, 162, 182 and 250 cc.

F12 Features
• Max intermittent pressure up to 480 bar and
continuous operating pressure up to 420 bar
• The 7 or 9 piston design provides high start-up torque
and smooth motor operation
• ISO, Cartridge, SAW and SAE versions

Download Catalog Here

GOLD CUP PUMP

Parker GOLD CUP® Pumps & Motors ensure high performance in severe-duty applications. With a robust design, they operate to pressures up to 6,000 psi & speeds up to 3,600 rpm. Before the 2004 acquisition, the product line was known as Denison Gold Cup.

Rugged and efficient, The GOLD CUP® series boosts productivity with hydrostatic piston pumps and motors that deliver exceptional performance in the most severe applications. Featuring a robust barrel bearing design and hydraulically controlled rocker cam, GOLD CUP® pumps and motors provide proven durability and reliable pressure control.

Technical Characteristics :

  • Maximum operating pressure of 420 bar (6,000 PSI)
  • Maximum speed of 3,600 rpm
  • Temperature range of -40 to 203°F (-40 TO 95°C)
  • Sizes from 6-30 cipr (100-500 cc)

Download Catalog Here

ALUMINIUM GEAR PUMP

Parker’s Aluminum Pump 505H Series is a silent fixed displacement gear pump which utilizes a specially developed rotor profile. Quiet high performance and high power density making them ideal in a broad selection of markets such as Material Handling, Agriculture, Turf, as well as a variety of Industrial Applications. They are available as single section pumps.

Applications: • Power steering pumps • Brake pump • Hydraulic Power Unit • Aerial Lift • Transfer pump • Lube pump

Technical Specifications: • Sizes from 4.2 to 12.9cc (0.25 to 0.79 cir) • Operating pressures up to 220 bar (3,191 psi) • Speeds up to 3,000 rpm • CW, and CCW rotation pumps available • SAE shafts, flanges and porting available

Download Catalog Here

eP2/eP3 PISTON PUMP

Parker eP2/eP3 series is based on proven P2/P3 series and prave the way into the digital world. The electronically closed loop displacement control can be supplemented by pressure and speed signal. These improves your hydraulic system in all categories. In addition, provided by the pump control module (PCM) the smart controller software in combination with a high connectivity allows real time adaption of the controller characteristic and a remote diagnosis. Furthermore, the PCM ensures a smooth implementation and a high-performance usage of the pump.

Applications: • Reachstackers • Heavy Lift Trucks • (All Terrain) Mobile Cranes • Cargo Loaders • (Articulated) Dump Trucks • Wheel Loaders • (Surface) Drill Rigs • Roadheaders • Forestry Forwarders • Forestry Harvesters • Agriculture Harvesters • (Flail) Mowers • Defense Vehicles

Download Catalog Here

AC/DC DRIVE D590+ SERIES

The DC590+ Integrator Series DC drive is the latest development of the range which also includes the AC690+ AC drives. It benefits from 30 years experience of designing and manufacturing drives for process line control with dedicated function blocks which simplify the implementation of applications such as sectional drive reels, winder control etc. The function block capabilities offer unparralleled flexibility in both new installations and retrofit applications. A number of common fieldbus communications options enable connectivity to a wide range of popular control networks allowing the DC590+ to be integrated in larger control systems.

Technical characteristics

  • 110 V - 220 V
  • 220 V - 500 V
  • 500 V - 600 V
  • 500 V - 690 V

Download Catalog Here

Parker PGP 500/600 Series

Parker PGP 500

PGP 500 pumps offer superior performance, high efficiency and low noise operation at high operating pressures. They are produced in four frame sizes (PGP 502, PGP 505, PGP 511, PGP 517) with displacements ranging from 0.8 to 70 cm³/rev. A wide variety of standard options is available to meet specific application requirements.

  • Superior performance
  • High efficiency
  • Low noise operation at high operating pressures
  • International mounts and connections
  • Integrated valve capabilities
  • Common inlet multiple pump configurations

Download Catalog here

Copyright @ 2025 | PT Besttoflow

need help? chat with us