OIL-X FILTER

The Parker OIL-X range of die-cast compressed air filters has been designed from the outset to meet the air quality requirements of all editions of ISO8573-1, when validated in accordance with the stringent requirements of ISO12500-1.

An efficient and cost effective manufacturing process is a major factor in maintaining the profitability and growth of your business. Designed using domnick hunter filtration technology, OIL-X filters are designed to not only minimise the use of compressed air and electrical energy in their operation, but also to significantly reduce the operational costs of the compressor by minimising pressure losses.

OIL-X filters incorporate a number of unique and patented design features to minimise differential pressure and provide a filter and element combination where the differential pressure starts low and stays low to maximise energy savings and provide the lowest lifetime costs without compromising air quality.

Technical Specifications

  • Maximum Flow Rate : 36 m³/h @ 7 barg (21 cfm @ 102 psig)
  • Filter Type : High Efficiency Coalescing
  • Micron Rating : Down to 0.01 micron
  • Connection Type : BSPP
  • Division : Gas Separation and Filtration EMEA
  • Brand : Parker
  • Technology : Filtration
  • Product Type : Compressed Air Filter
  • Product Series : OIL-X Grade AA
  • Application : Industrial Manufacturing Equipment Food & Beverage Automotive Electronics Pharmaceuticals Medical & Dental
  • Filter Efficiency Rating : 99.9999%
  • Residual Oil Content : 0.01 mg/m³ / 0.01 ppm(w) @ 21°C (70°F)
  • Pressure Differential : Initial Saturated, 100%
  • Flow : 117 mbar (1.7 psi)
  • Materials of Construction : Die Cast Aluminium
  • Drain : Automatic Float
  • Operating Pressure : 1.5 to 16 barg (22 to 232 psig)
  • Operating Temperature : 2°C to 65°C (35°F to 149°F)
  • Compatible Element : P010AA
  • Element Change Interval : 12 Months
  • Specifications Met : Fully tested - In accordance with ISO12500-1 / ISO8573-2 for oil aerosol and ISO8573-4 for particulate. Filtration performance independently validated - by Lloyds Register. PED 2014/68/EU Fluid Group II.
  • Height : 180 mm (7.09 inch)
  • Width : 76 mm (2.99 inch)
  • Depth : 65 mm (2.56 inch)
  • Weight : 0.81 Kg (1.78 lbs)

Download Catalog Here

PISTON PUMP PV

Parker PVplus axial piston pump with variable displacement has been designed and optimized for demanding use in heavy duty industrial and marine applications. With pressure ratings of up to 420 bar and high-speed ratings this open circuit, swashplate principle axial piston pump provides high productivity and power density to its users. Beside its robustness and exceptionally long service life, PVplus is also characterized by a very high conversion flexibility. As a standart every PVplus comes with an intergrated pre-compression volume which ensures low ripple operation and reduced noise emissions. A wide range of displacements and control options allows for a wide range a applications.

Technical Specifications :

  • Pump Type : Piston, Variable
  • Operating Pressure : 420 Bar, 6000 Psi
  • Displacement : 16 to 360 cm3/rev, 1 to 22 inch3/rev
  • Flow Rate : 12 to 166 Gal/min, 48 to 630 L/min
  • Technology : Hydraulics
  • Maximum Operating Speed : 3000 RPM
  • Maximum Fluid Temperature : 115 °C, 239 °F
  • Maximum Noise Level : 96 dBA

Download Catalog Here

OIL PURIFIER

The PVS Series Portable Purification Systems, available in several models, is used to draw water contaminated fluid out of a system, remove the water content and return the ‘clean’ fluid to the reservoir. Maximum flow 170 l/min (PVS2700). Reduce the catastrophic results of water contamination.

Water is one of the most common and destructive contaminants in a fluid system. When water contaminates a system, it can cause serious problems such as:

  • Corrosion by etching metal
  • Fluid breakdown, reduction of lubricatingproperties, additive precipitation, and oil oxidation
  • Reduced dielectric strength
  • Abrasive wear in hydraulic components

Specifications :

  • Flow rate: 19 lpm (4.2 gpm).
  • Height: 1651mm (65”).
  • Width: 825.5mm (32.5”).
  • Length: 1206.5mm (47.5”).
  • Weight: 294.8 kg (650 lbs).
  • Seal material: Fluorocarbon (EPR opt.).
  • Condensate tank: 15.5 ltrs (3.4 gals).
  • Dispersal elements: 1.
  • Minimum operating capacity: 18.9 ltrs (4.2 gals).
  • Vacuum (max): 25 In/Hg.
  • Viscosity (max): 108 cSt (500sus) – disposable. 460 cSt (2150 sus) – packed tower.
  • Outlet pressure (max): 4.1 bar (60 psi).
  • Ports: 3/4” JIC (male) inlet. 3/4” JIC (male) outlet.
  • FLA (full load amps): 15-41 amps.

Download Catalog Here

MPI FITTINGS

Parker's MPI™ Series is an inverted two ferrule design engineered and manufactured to provide secure, tight, and leak resistant connections for small bore instrumentation applications up to 15,000 PSI.

Parker MPI™ Fittings are an inverted two ferrule, compression design. They are engineered and manufactured to provide secure, tight, and leak-resistant connections throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures in the range of 6,000 to 15,000 psi.

MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including cold drawn – 1/8 hard (unannealed) stainless steel tubing, annealed 2507 seamless tubing or instrument grade thick-walled annealed stainless steel. Every Parker MPI™ Fitting is supplied complete and ready to install.

Features/Benefits: • Front ferrule with corrosion-resistant Parker Suparcase® forms a seal between the tube, body and ferrule. It also provides a mechanical hold on the tube. • Back ferrule with corrosion-resistant Parker Suparcase® provides a strong mechanical hold on the tube. • Longer thread area for improved resistance to pressure and load on the ferrules. • Molybdenum disulfide-coated inverted nut helps prevent galling, provides easier assembly, and permits multiple remakes. • Long tube-support area improves resistance to vibration and line loads.

Download Catalog Here

GEROTOR TG

The heart of Parker’s TG Series powertrain, the drive link, is an extra heavy duty part that includes unique 60:40 spline geometry. Rugged construction throughout allows the transmission of up to 13,000 lb-in of torque. The entire powertrain is continually washed in cool, high flow fluid to assure long life. Roller vanes and sealed commutator maintain high efficiency and provide smooth low speed performance.

Performance data based on testing using 10W40 oil with a viscosity of 200 SUS at 54° C (130° F.). Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l’huile 10W40 d’une viscosite de 200 SUS a 54°C (130°F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d’un moteur de production a l’autre. Leistungsdaten sind gemessen mit SAE 10W40 bei einer Viskositaet von 43,1 Cst bei 54oC. Geringfuegige Abweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 10W40 de 200 SUS de viscosidad a 54°C (130°F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores.

Download Catalog Here

LEGRIS HOSE & CONNECTOR

Parker’s broad selection of pneumatic fittings provide connectivity solutions for a whole range of pneumatic applications. We offer a broad portfolio of products within our pneumatic fittings range and have plenty of material options and device configurations to suit the demands of your project which are easy to install. They also have the capability to withstand a variety of industrial media. Our pneumatic fittings are suitable for use in a wide variety of applications serving across many of today's major industrial markets.

Whether you need airbrake tubing, medical tubing or a particular material, such as PVDF or metric metal tubing, Parker makes it. Parker delivers one of the largest selections of tubing available from one manufacturer. Sizes range from .015” I.D. up to 6” O.D. depending on style.

Download Catalog Here

IQAN CONTROL SYSTEM

The IQAN software covers all phases of a machine’s life cycle, from development through production to after sales. There are three different softwares available for purchase; IQANdesign, IQANrun and IQANscript. Supporting softwares IQANsimulate and IQANanalyze are available free of charge.

IQAN Run may be used by the service department and can be adapted to feature machine-specific procedures for maintenance, fault finding and web supported machine upgrades, while the machine owner can access spare parts manuals, maintenance videos, service intervals and service suggestions. IQAN Run software is a user-friendly service, production and machine owner tool which includes a powerful, graphical measure capability and simplifies machine tuning for increased productivity.

Requirements : - CPU PC compatible, Pentium® II 233 MHz or better - RAM minimum 256 Mbyte (512 Mbyte recommended) - HD 100 Mbyte storage space available - Ports RS232 or USB port, Ethernet - Display XVGA (1280x1024 recommended) - Software Windows® 7, 8, 10

Download Catalog Here

HYDRAULIC HOSE & FITTINGS

Parker has the largest hydraulic hose range in the market, which are available with the most abrasion-resistant covers. As marketing-leading hydraulic hose manufactures, we offer a a range that can deliver high performance and can withstand the harshest working environments. Our hoses are designed to perform in both high and low temperatures and pressures and are suitable for a variety of applications. Each of our hydraulic hoses are also in compliance with stringent industry standards such as REACH and RoHS.

Parker's comprehensive range of hydraulic fittings fulfills todays application requirements as well as state of the art safety and quality needs. Our fittings are specifically designed to perfectly match with the respective hose types for superior service life and leak free operation.

Download Catalog Here

COMMERCIAL GEAR PUMP BUSHING

Parker’s PGP330 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction, making them ideal for high duty cycle mobile applications for the Construction, Foresty, and Oil & Gas markets. They are available as a standart pump, clutch pump, and tandem pump.

Technical Specifications :

  • Flow range to 40 gpm (151 lpm) per section
  • Displacements from .985 to 3.94 cir (16 to 65 cc/rev)
  • Operating pressures up to 241 bar (3,500 psi)
  • Speeds up to 3,000 rpm
  • Volumetric efficiencies up to 98%
  • CW, CCW, and BI-rotational pumps available
  • SAE and SI shafts, flanges and porting available
  • Multiple section, as well as Cross frame add-a-pumps
  • Extensive integrated valve capabilities

Download Catalog Here

COMMERCIAL GEAR PUMP BEARING

Parker’s 031 series fixed/positive displacement gear pumps offer high durability & resistance to oil contamination due to their cast iron, roller bearing construction, making them an ideal selection for the Vocational Truck, Winch, and Oil & Gas markets. They are available as single or multi-section pumps with an integral valve.

Technical Specifications: • Flow range to 38.4 gpm (145.4 lpm) per section • Displacements from .985 to 3.94 cir (16.2 to 64.6 cc/rev) • Operating pressures up to 200 bar (3,000 psi) • Speeds up to 2,400 rpm • Volumetric efficiencies up to 95% • CW, CCW, and Bi-rotational pumps available • SAE and SI shafts, flanges and porting available • Multiple section • Extensive integrated valve capabilities - Relief with anti-cavitation check - Priority flow control - Unloader valves - Accumulator charge (single and dual) - Two-speed valves (winches, ground drives) - Load sense priority flow divider (bolt-on) - Dry valves, HOC™ (hydraulic overspeed control), flow controls - Crossover relief valves

Download Catalog Here

Copyright @ 2025 | PT Besttoflow