CYLINDER

Parker is the world's largest supplier of hydraulic cylinders and parts for industrial applications. Parker manufactures a diverse range of standard and special tie rod, roundline and 'mill' type cylinders to suit all types of industrial cylinder applications. Our cylinders meet every major industry standard, with other certifications available upon request. All Parker hydraulic cylinders and parts are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity throughout the life of the product.

Standard Specifications • Heavy Duty Service – ANSI/(NFPA) T3.6.7R3 - 2009 Specifications and Mounting Dimension Standards • Standard Construction – Square Head – Tie Rod Design • Nominal Pressure – 3000 psi1 • Standard Fluid – Hydraulic Oil • Standard Temperature – -10°F to +165°F2 • Bore Diameters – 1.50" through 6.00" (Larger sizes available)                                                                                                                                                                • Piston Rod Diameter – .625" through 4.000" • Mounting Styles – 18 standard styles at various application ratings • Strokes – Available in any practical stroke length • Cushions – Optional at either end or both ends of stroke. “Float Check” at cap end. • Rod Ends – Four Standard Choices – Specials to Order

Download Catalog Here

TUBE FLARING / DEBURRING TOOL

The EO-KARRYMAT is a dependable device for safe and efficient bite-type presetting. It allows pre-assembly of even large dimension steel and stainless steel tube at assembly sites where EOMAT technology is not available. The EO-KARRYMAT consists of a hydraulic drive and a handpump. The hydraulic assembly pressure can be read on a gauge. The EO-KARRYMAT comes as one unit with all components firmly attached to a practical carrying frame.

Parker's 45° flaring tools with easy to turn handles flares and burnishes soft metal tubing from 3/16" to 3/4" and 5mm to 16mm O.D. tubing. Parker also offers a tool for double flaring.

Download Catalog Here

TUBE WITH FITTING

The tube programme from Parker Hannifin gives all possibilities for usage in hydraulic applications. Tubes for fitting- and flange-systems, tubes for mobile and stationary systems. Different dimensions, carbon- and stainless-steel tubes as well as different surfaces are available. Parker tubes are designed for the special requirements in several markets. Continuous tests in laboratories and on test benches ensure the high quality level of the material. Certifications from independent institutes such as ABS, LR or DNV confirm the adherence to high standards. This opens into reliability and longevity of the hydraulic application. The Parker Hannifin tube-warehouse with its worldwide network provides a close and prompt supply of high precision tubes; thus, international customers can also rely on us. Efficient, reliable, environmentally friendly and on-time deliveries are available in almost every country in the world.

Ermeto hydraulic DIN fitting components for high pressure hydraulic tube fittings are indispensable items in order to build up a complete fitting series (EO-PSR, EO-2, EO2-FORM). The FM EO-2 functional nut is available with sealing NBR or sealing FKM.

Download Catalog Here

PARKRIMP 2

The Parkrimp 2 is Parker's largest and most versatile bench mounted crimper that comes in either single phase or three phase electric. Parker's Parkrimp 2 models can crimp straight or bent-stem steel and stainless steel fittings from ¼” to 2" in diameter including 16, 26, 43, 46, 48, 70, 73 and 77 series.

Features/Benefits: • Portable, compact, rugged design • Parker's exclusive Parkalign system, which positions the fitting in the die for a perfect crimp every time • An efficient bottom-loading design that makes it easier for operators to manage long hose assemblies • Linked dies that prevent segments from being misplaced or mismatched • Dies that are color coded by size for easy identification and reduced set-up time • Durability that provides years of reliable service • An information-rich decal that details the list of proper hose and fitting combinations, tools required and the crimp specification for each hose and fitting combination

Applications: • Enables any user to make factory-quality hose assemblies

Download Catalog Here

COALMASTER HOSE

Parker FRAS Mining Hose is made from a lightweight, highly abrasion resistant,high technology thermoplastic polymer which was developed especially for use in the mining industry. Parker FRAS conforms to AS 2660 class A, and AS/NZS 2554 class A, and is suitable for the most arduous mining and industrial applications. The product is flame resistant and antistatic.High working pressure of 305psi with a 4:1 safety factor. Also available in 25mm is the higher rated working pressure option of 500psi (refer FSX series)

Applications:
• Air / Water transfer
• Suitable for underground coal mines

Download Catalog Here

VELCON DIESEL FILTRATION

Diesel Filtration Skid
DFS™ Series
Combining Particulate Filtration with Water Coalescing

Providing high quality fuel to the modern high pressure common rail fuel injection systems is imperative to avoid costly downtime and engine repair.

The Velcon Diesel Filtration Skid (DFS) plays an important role in a comprehensive fuel contaminant control program as it provides fuel conditioning to assure the consistent removal of abrasive particles and damaging water.

The DFS offers a complete fuel filtration solutions which incorporates both particulate and water contaminant removal technologies mounted on a skid base that can be quickly installed and put into operation.

Key components of the DFS includes filter (DVF) and coalescing (DV) housings which have proven to withstand years of service in the most challenging environments. Velcon DFO particulate filters and DI and DSO coalescer and separator cartridges are used for conditioning contaminated fuels to meet the most stringent ISO 4406 and ASTM D975 standards for emulsified and free water as well as abrasive particulate. All filtration cartridges are available with threaded base endcap option for quick filter removal and ease of installation.

Models Available
DFS1:
– Flow Rate Range: 135 – 330 GPM
– Footprint: 70 in. x 60 in.
– Dry Weight: 1985 lbs.
– I/O Flange: 4 in.

DFS2:
– Flow Rate Range: 230 – 570 GPM
– Footprint: 80 in. x 60 in.
– Dry Weight: 2250 lbs.
– I/O Flange: 4 in.

DFS3:
– Flow Rate Range: 420 – 1045 GPM
– Footprint: 110 in. x 80 in.
– Dry Weight: 3400 lbs.
– I/O Flange: 6 in.

Download Catalog Here

BALDWIN FUEL FILTER

Baldwin lube filter spin-ons protect your engine from wear particles that can otherwise lead to premature parts failure. Longer drain intervals requires filters that have both high capacity and the ability to withstand the rigors of time and temperature without failing or going into bypass. Baldwin's lube filters are up to the challenge.

  • Application : Hitachi Equipment
  • Compatible Competitor Part Number : Hitachi 4206079
  • Brand : Baldwin
  • Industry : Automotive Heavy-duty on-highway transportation Commercial trucks and buses Agriculture Construction Industrial Marine Mining Oil & Gas Power Generation
  • Product Style : Lube Filter
  • Technology : Filtration

Download Catalog Here

Diaphragm Accumulator – DA Series

Parker DA series diaphragm / membrane accumulators are inexpensive, compact, lightweight, low maintenance and ideally suited where weight and space is an important consideration. They were formerly known as ‘ELM’ diaphragm accumulators. They offer a reliable and efficient solution for storing energy under pressure and work as a hydraulic ‘spring’.

Parker DA accumulators are gas-loaded with separation between the liquid and gas sides achieved by a flexible diaphragm. They are available in 2 elastomer mixes: Nitrile and Hydrin (for low temperature working conditions) with a maximum pressure of 350 bar (up to 2.8 litres) and volume of 3.5 litres (up to 250 bar).

Parker DA accumulators come with a bonded seal (BS) fluid port with female or male and female fluid connection and M28 x 1.5 gas connection.

Technical specifications:

  • Gas volume up to 3.5 litres
  • Maximum operating pressure up to 350 bar
  • High compression ratio – up to 8, according to type
  • Certificates: PED 2014/68/EU or Article 4.3
  • Valve, gas side: nitrogen rechargable M28 x 1.5
  • Valve, oil side: female 1/2″ BSP or 3/4″ BSP | female 1/2″ BSP and male M33 x 1.5 | female 3/4″ BSP and male 45 x 1.5
  • Body material: carbon steel
  • Elastomer material: NBR nitrile standard rubber
  • Operating temperature:  -35°C (ECO) or -20°C (NBR) to +80°C
  • Weight: 0.7 kg to 16.5 kg
  • Height: 112 mm to 326 mm
  • Diameter: 64 mm to 180 mm

Download Catalog Here

AUTOCLAVE VALVE

Parker Autoclave’s VRMM Series micro-metering valves are designed for applications where more precise control of small flows is required than is possible with a standard regulating stem. Barrel and Thimble micrometer design permits settings to be repeated. Metering is effected by a finely tapered stem acting in a precisely mated replaceable seat. Very fine stem position is achieved utilizing a 40 TPI thread. The Barrel and Thimble are set for proper metering at the factory.

These valves are designed for metering only and cannot be used as a shutoff valve. Minimum flow is factory set and occurs at “0” position. DO NOT OPERATE THE VALVE BELOW THE ZERO POSITION OR DAMAGE WILL RESULT. When shutoff action is required, a correlated shutoff valve from Parker AE series 10V, 30VM or 60VM should be installed in series with the micro-metering valve.

Technical Specifications

  • Body Material : 316 Stainless Steel
  • Body Type : 2-Way Angle
  • Tube Size : 1/4″ Cone and Thread
  • Maximum Working Pressure (psi) : 30, 000
  • Stem Type : Reg
  • Brand : Autoclave
  • Technology : Process Control
  • Application : High Pressure Fuid Handling

Download Catalog Here

BLADDER ACCUMULATOR – EHV SERIES

The EHV bladder accumulator offers a reliable and efficient solution for storing energy under pressure. Utilizing comprehensive tools and resources including an applications database, CAD/CAM, finite element analysis, reliability studies and simulation we have optimized the design and performance of the accumulator. Parker Olaer bladder accumulators are suitable for use in more than 35 countries (all hydraulic accumulators for Europe are CE marked) and they can meet an extensive range of international and industry approvals. Rigorous product testing and continuous product development help to ensure our hydraulic accumulators operate at optimum efficiency and can perform in the most demanding environments. Parker accumulator accessories such as Safety Blocks, Burst Discs and Permanent Charging Sets, can aid the safe installation and operation of the accumulators in any hydraulic system.

  • Volume : 0.2 to 57 Liters
  • Pressure : 330 to 690 bar
  • Shell Material : Shell carbon steel with primar coating , fluid port and stem valve cabrbon steel zinc plated. Optional other materials
  • Bladder Materials : Various bladder materials available which are compatible with a wide range of fluids and temperatures.
  • Fluid Port : including anti-extrusion system
  • Approvals : PED 2014/68/EU, ATEX, ASME VIII div 1, SELO, CUTR, DNV, BUREAU VERITAS MARINE, ABS, DNV GL.
  • Specials : For special constructions please consult Parker.
  • Maximum pressure differential (P2/P0) :  4:1
  • Nitrogen gas pressure : The maximum pressure (PS) with nitrogen purity > 99.8% N2 class 2.8, is indicated on the accumulator.

Download Catalog Here

Copyright @ 2025 | PT Besttoflow