MGG GEROTOR

Parker’s Aluminum Motor MGG Series fixed displacement High Speed Low Torque Gerotor motor offers high performance and high power density dues to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets.  It is available as a standard pump, or a pump with a primary circuit relief valve.

Technical Specifications

  • Motor Displacement (cu in/rev) : 0.580
  • Rotation : Bi-Direction
  • Shaft Seal Material : NBR
  • Flow Rate (gpm) : 2.51
  • Porting : SAE 10 Straight Thread - Side
  • Mounting Style : SAE 2-BOLT "A-A"
  • Shaft Type : 9/16 Dia. 8-tooth w/1.12 min full spline
  • Size : 0025
  • Weight (lbs) : 3.3
  • Product Type : Gerotor Motor, aluminum w/roller bearing
  • Size : 25
  • Displacement:Motor : 0.58 inch3/rev, Motor: 9.505 cm3/rev
  • Shaft Seal Material : NBR
  • Mounting Type : SAE 2-BOLT "A-A"
  • Shaft Type : 9/16 Dia. 8-tooth w/1.12 min full spline
  • Number of Ports : SAE 10 Straight Thread - Side
  • Direction of Rotation : Bi-Direction
  • Maximum Operating Speed : 5000 RPM
  • Flow Rate : 2.51 Gal/min, 9.5 L/min
  • Maximum Continuous Pressure : 2000 psi
  • Maximum Operating Pressure : 2500 psi
  • Torque Rating : 92 lb-inch
  • Weight : 3.3 lb, 1.5 kg
  • Maximum Oil Temperature : 180 °F, 82.2 °C
  • Maximum Kinematic Viscosity : 150 SUS
  • Filter Efficiency Rating : 10 micron [recommended minimum]

Download Catalog Here

FOOD HOSE

Parker's PURE food grade hoses enable a clean and safe transfer of a wide variety of foods, beverages and sanitary materials. Our products are offered in a comprehensive range of constructions and also offer multiple colors, pressures, sizes and temperature capabilities to meet customer needs. All of our food grade hoses meet government and industry standards and our hose tubes are suitable for a variety of markets. They also offer full suction capability and kink resistance to extend their usability and enhanced cover options for convenient cleaning. Explore our markets below and learn more about Parker PURE hoses.

Premium quality, extra flexible delivery and suction hose designed for both fatty and non-fatty food products.

  • 150 psi working pressure
  • -13°F / +176°F ( -25°C / +80°C)
  • Tube : White Nitrile, phthalates free
  • Reinforcement : Synthetic plies, galvanized wire helices
  • Sizes : 1", 1-1/2", 2", and 3"
Download Catalog Here

F3 DISENGAGEABLE PUMP

The new, disengageable F3 series is a global innovation in mobile hydraulics. By engaging and disengaging the pump from the diesel engine on the fly, you can save substantial amounts of fuel. But you also reduce wear and tear on the pump and minimize the risk of costly downtime and standstills – while also reducing the noise level. All that is required is to press a button on the dashboard, without turning off the engine!

For the average truck running 100,000 kilometres a year, savings can amount to between 200 and 300 litres (45–65 gallons) less diesel, with a corresponding reduction in emissions of greenhouse gases and particulates, all due to the F3 pump being completely disconnectable when not in use. This is a unique, patented characteristic now being launched by Parker.

Download Catalog Here

TUBE BENDER TOOL

Parker's hydraulic tube bender, HB632, is powered by 10,000 psi of pressure to bend steel and stainless steel tube up to 2” and 50mm O.D., and pipe up to 1 ½”. The hydraulic power, size capabilities and accurate bends make this draw bender a great choice for high production bending.

Technical Characteristics: • Minimum components required with the HB32 bender are a hose assembly, hydraulic pump, and a radius slide and clamp block, which match the tube/pipe O.D. to be bent. • Radius blocks for 1 ¾” through 2” O.D. require an adapter plate. • The maximum bend angle is 180° with radii from 1 ¼” to 8”. • If mandrels are used, the HB632 hydraulic bender must be bolted to a table, and will also require the use of a mandrel rod and mandrel rod stop assembly which holds and supports the end of the mandrel rod in alignment with the tubing. • Requires a hydraulic pump which is sold separately.

Download Catalogue Here

HYDRAULIC FILTER

Modern high pressure hydraulic systems are demanding.  Improved controls and long component life are expected. To deliver the high standards of performance, hydraulic components are built with tighter tolerance and higher system pressures, which increase a system’s sensitivity to contamination. Pressure filters are used to safeguard expensive downstream components from contaminants, helping to protect a system from devastating failure.
Parker’s World Pressure Filter (WPF) series offers a new concept in High Pressure Fluid Filtration Solutions. Parker engineers have developed an innovative alternative to conventional high pressure and reverse flow filters. The WPF design incorporates all the benefits of Ecoglass media along with a unique reverse flow and bypass valve arrangement. The design offers superior element integrity protection when transient reverse flow spikes are encountered.
Parker pressure filters are a valuable and required component in meeting today’s system demands. Parker’s WPF series removes ingressed contamination before it flows downstream to sensitive components.  They block pump-generated debris before it gets to servo or proportional valves. There is no better high pressure filter available today for durability and performance.
Typical Applications:
• Aircraft Ground Support
• Injection Molding
• Mining
• Mobile Ag
• Mobile Construction
• Oil & Gas Exploration
• Power Generation
• Primary Metals
• Refuse Trucks
Download Catalog Here

CYLINDER

Parker is the world's largest supplier of hydraulic cylinders and parts for industrial applications. Parker manufactures a diverse range of standard and special tie rod, roundline and 'mill' type cylinders to suit all types of industrial cylinder applications. Our cylinders meet every major industry standard, with other certifications available upon request. All Parker hydraulic cylinders and parts are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity throughout the life of the product.

Standard Specifications • Heavy Duty Service – ANSI/(NFPA) T3.6.7R3 - 2009 Specifications and Mounting Dimension Standards • Standard Construction – Square Head – Tie Rod Design • Nominal Pressure – 3000 psi1 • Standard Fluid – Hydraulic Oil • Standard Temperature – -10°F to +165°F2 • Bore Diameters – 1.50" through 6.00" (Larger sizes available)                                                                                                                                                                • Piston Rod Diameter – .625" through 4.000" • Mounting Styles – 18 standard styles at various application ratings • Strokes – Available in any practical stroke length • Cushions – Optional at either end or both ends of stroke. “Float Check” at cap end. • Rod Ends – Four Standard Choices – Specials to Order

Download Catalog Here

TUBE WITH FITTING

The tube programme from Parker Hannifin gives all possibilities for usage in hydraulic applications. Tubes for fitting- and flange-systems, tubes for mobile and stationary systems. Different dimensions, carbon- and stainless-steel tubes as well as different surfaces are available. Parker tubes are designed for the special requirements in several markets. Continuous tests in laboratories and on test benches ensure the high quality level of the material. Certifications from independent institutes such as ABS, LR or DNV confirm the adherence to high standards. This opens into reliability and longevity of the hydraulic application. The Parker Hannifin tube-warehouse with its worldwide network provides a close and prompt supply of high precision tubes; thus, international customers can also rely on us. Efficient, reliable, environmentally friendly and on-time deliveries are available in almost every country in the world.

Ermeto hydraulic DIN fitting components for high pressure hydraulic tube fittings are indispensable items in order to build up a complete fitting series (EO-PSR, EO-2, EO2-FORM). The FM EO-2 functional nut is available with sealing NBR or sealing FKM.

Download Catalog Here

Parker PGP 500/600 Series

Parker PGP 500

PGP 500 pumps offer superior performance, high efficiency and low noise operation at high operating pressures. They are produced in four frame sizes (PGP 502, PGP 505, PGP 511, PGP 517) with displacements ranging from 0.8 to 70 cm³/rev. A wide variety of standard options is available to meet specific application requirements.

  • Superior performance
  • High efficiency
  • Low noise operation at high operating pressures
  • International mounts and connections
  • Integrated valve capabilities
  • Common inlet multiple pump configurations

Download Catalog here

Copyright @ 2025 | PT Besttoflow