Parker VP1 hydraulic variable truck pump series has operating pressures up to 420 bar (6,100 psi) and speeds up to 3000 rpm. The VP1 pump is a robust design that provides circuit reliability for the most demanding truck applications. Sizes from 45-130cc. Technical Specifications : Pump Type : Piston, Variable Displacement : 45 to 130 cm3/rev, 2.74 to 7.93 inch3/rev Operating Pressure : up to 6090 psi, up to 420 bar Maximum Operating Pressure : 3000 RPM Body [...]
The M3B and M4* have been specifically designed for longer life in severe duty applications that require high pressures up to 230 bar, high speed up to 4000 RPM and low fluid lubricity. Technical Specifications : Torque Rating : 102 to 567 ( at 175 bar) Nm Direction of Rotation : Bi-directional Maximum Operating Pressure : 175 to 230 Bar Flange Size : SAE B, SAE C, SAE A Outlet Port Size : SAE 16 - 1.5/16" UNF, [...]
Parker’s Aluminum Motor MGG Series fixed displacement High Speed Low Torque Gerotor motor offers high performance and high power density dues to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. It is available as a standard pump, or a pump with a primary circuit relief valve. Technical Specifications Motor Displacement (cu in/rev) : 0.580 Rotation : Bi-Direction Shaft Seal Material : NBR Flow Rate (gpm) : [...]
The new, disengageable F3 series is a global innovation in mobile hydraulics. By engaging and disengaging the pump from the diesel engine on the fly, you can save substantial amounts of fuel. But you also reduce wear and tear on the pump and minimize the risk of costly downtime and standstills – while also reducing the noise level. All that is required is to press a button on the dashboard, without turning off the engine! For the average [...]
The M5 series is tailored for severe duty applications which require high pressure, high speed and low fluid lubricity. Technical Specifications : Drain Port Size : SAE 6 - 9/16" UNF, M12 X 1,5 Metric thread, 1/4" BSPP, M18 X 1,5 Metric thread Continuous Outlet Pressure Port 1 : 260 to 300 bar Brand : Denison Intermittent Outlet Pressure Port 1 : 280 to 320 bar Rated Speed : 2500 to 6000 RPM Download Catalog [...]
The Series V12 is a Bent Axis, Variable Displacement Motor. This renowned series of impressively engineered motors is intended of both open and closed circuits has been specifically designed for the most demanding mobile applications, Hhowever the V12 can also be utilized in a wide variety of other applications. Available in 2 sizes in ISO, SAE and Catridge versions. The small envelope size makes for a clean and cost-effective installation. Parker V14 hydraulic motor series has an operating [...]
Parker radial piston fixed displacement hydraulic motors, with unique fluid column technology, have been specifically engineered for high mechanical and volumetric efficiency over a wide range of speed and torque. MR motors are combined into 10 different frame sizes, corresponding to 39 standard displacements available, from 75 cc/rev to 9000 cc/rev. Technical Specifications : Speed Feedback Option:Tachogenerator drive Rotation:Clockwise Shaft Type:Male spline DIN 5463 Material - Seals:Buna-N Connection Type:Six-bolt connection Outlet Port Displacement 1 (cc/rev):2792 Flange Size:335 h7 [...]
Parker P1 Medium Pressure Mobile Hydraulic piston pump for open-circuit mobile applications increase productivity and improve the working environment with a robust cradle-bearing design, wide temperature range, full power thru-drive capability and an optional torque limiter. Featuring unique "ripple chamber" technology, P1 variable displacement pumps minimize pressure pulsations and decrease noise. with lower power consumption and reduced heat, the series ensures reliable performance and efficient control. Technical Characteristics : Maximum Operating pressure of 280 bar (4,060 psi) Speed [...]
Parker PVplus axial piston pump with variable displacement has been designed and optimized for demanding use in heavy duty industrial and marine applications. With pressure ratings of up to 420 bar and high-speed ratings this open circuit, swashplate principle axial piston pump provides high productivity and power density to its users. Beside its robustness and exceptionally long service life, PVplus is also characterized by a very high conversion flexibility. As a standart every PVplus comes with an intergrated [...]
The PVS Series Portable Purification Systems, available in several models, is used to draw water contaminated fluid out of a system, remove the water content and return the ‘clean’ fluid to the reservoir. Maximum flow 170 l/min (PVS2700). Reduce the catastrophic results of water contamination. Water is one of the most common and destructive contaminants in a fluid system. When water contaminates a system, it can cause serious problems such as: Corrosion by etching metal Fluid breakdown, reduction [...]
