STEAM HOSE

Dragon Breath® II Barber Pole Steam Hose is designed for steam applications to 406°F for saturated steam at 261 psi and 450° for superheated steam at 250 psi, Series 7285 Technical Specifications : Hose I.D. (inch): 1/2 - 1 inch Hose Outside Diameter:1 inch, 26.2 mm Hose Reinforcement Material:Multiple Wire Braids Hose Inner Tube Material:Black Chlorobutyl Maximum Operating Temperature:450 °F Superheated Steam, 232 superheated steam °C, 208 Saturated Steam °C, 406 Saturated Steam °F Minimum Bend Radius:7 inch, [...]

RACOR FUEL FILTER

The Parker Racor Fuel Filter Water Separator Turbine Series is the most trusted line of fuel filter water separators on the market. The assembly’s three-stage filtration system effectively removes water and particulates from fuel, providing maximum protection of diesel engine components in applications where reliability is critical. To meet the unique requirements of customer’s engines, Racor Turbine Series fuel filter water separators are available in a wide range of configurations. All models utilize Racor’s proprietary Aquabloc® filtration elements. [...]

PARFLANGE F37

The Parflange F37 flanged connector system is utilising the orbital tube forming technology for tubing assemblies from 16 to 273 mm (1/2" to 10" Flanges) outside diameter. It is intended for tube wall thickness up to 9 mm and pressure ratings up to 420 bar. For those connections without the possibility to assemble a pre-flared tube or where manufacturing is limited, Parker provides the F37 Retaining Ring System. This System utilizes a Retaining Ring for flange retention along [...]

POLYFLEX HOSE

The hose assemblies are made from high-pressure hose and the corresponding fittings by Parker Polyflex and the company’s trained and certified distributors in compliance with Parker assembly instructions. They are pressure tested after completion. Upon customer’s request, the hose assemblies can be equipped with protective sleeves or other safety equipment such as containment grips. The working pressures of both hoses and fittings are limited. In rare cases, fittings with a lower working pressure than the hose may be [...]

MPI FITTINGS

Parker's MPI™ Series is an inverted two ferrule design engineered and manufactured to provide secure, tight, and leak resistant connections for small bore instrumentation applications up to 15,000 PSI. Parker MPI™ Fittings are an inverted two ferrule, compression design. They are engineered and manufactured to provide secure, tight, and leak-resistant connections throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures in the range of 6,000 to 15,000 psi. MPI™ [...]

COMMERCIAL GEAR PUMP BEARING

Parker’s 031 series fixed/positive displacement gear pumps offer high durability & resistance to oil contamination due to their cast iron, roller bearing construction, making them an ideal selection for the Vocational Truck, Winch, and Oil & Gas markets. They are available as single or multi-section pumps with an integral valve. Technical Specifications: • Flow range to 38.4 gpm (145.4 lpm) per section • Displacements from .985 to 3.94 cir (16.2 to 64.6 cc/rev) • Operating pressures up to [...]

F11/F12 MOTOR

Parker F11 hydraulic motor series has operating pressures up to 420 bar (6,100 psi) and speeds up to 14.000 rpm. The F11 motor is a robust design motor, and can be used in numerous applications in both open and closed loop circuits. Sizes from 5-19 cc. Parker F12 hydraulic motor series has operating pressures up to 500 bar (7,250 psi) and speeds up to 7.300 rpm. The F12 motor is a robust design motor, and can be used [...]

AUTOCLAVE VALVE

Parker Autoclave's VRMM Series micro-metering valves are designed for applications where more precise control of small flows is required than is possible with a standard regulating stem. Barrel and Thimble micrometer design permits settings to be repeated. Metering is effected by a finely tapered stem acting in a precisely mated replaceable seat. Very fine stem position is achieved utilizing a 40 TPI thread. The Barrel and Thimble are set for proper metering at the factory. These valves are [...]

Copyright 2023 PT BESTTOFLOW | All Rights Reserved