Parker VP1 hydraulic variable truck pump series has operating pressures up to 420 bar (6,100 psi) and speeds up to 3000 rpm. The VP1 pump is a robust design that provides circuit reliability for the most demanding truck applications. Sizes from 45-130cc. Technical Specifications : Pump Type : Piston, Variable Displacement : 45 to 130 cm3/rev, 2.74 to 7.93 inch3/rev Operating Pressure : up to 6090 psi, up to 420 bar Maximum Operating Pressure : 3000 RPM Body Material :
The M3B and M4* have been specifically designed for longer life in severe duty applications that require high pressures up to 230 bar, high speed up to 4000 RPM and low fluid lubricity. Technical Specifications : Torque Rating : 102 to 567 ( at 175 bar) Nm Direction of Rotation : Bi-directional Maximum Operating Pressure : 175 to 230 Bar Flange Size : SAE B, SAE C, SAE A Outlet Port Size : SAE 16 – 1.5/16″ UNF, 1″ SAE
Parker’s Aluminum Motor MGG Series fixed displacement High Speed Low Torque Gerotor motor offers high performance and high power density dues to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. It is available as a standard pump, or a pump with a primary circuit relief valve. Technical Specifications Motor Displacement (cu in/rev) : 0.580 Rotation : Bi-Direction Shaft Seal Material : NBR Flow Rate (gpm) : 2.51 Porting
The new, disengageable F3 series is a global innovation in mobile hydraulics. By engaging and disengaging the pump from the diesel engine on the fly, you can save substantial amounts of fuel. But you also reduce wear and tear on the pump and minimize the risk of costly downtime and standstills – while also reducing the noise level. All that is required is to press a button on the dashboard, without turning off the engine! For the average truck running
The M5 series is tailored for severe duty applications which require high pressure, high speed and low fluid lubricity. Technical Specifications : Drain Port Size : SAE 6 – 9/16″ UNF, M12 X 1,5 Metric thread, 1/4″ BSPP, M18 X 1,5 Metric thread Continuous Outlet Pressure Port 1 : 260 to 300 bar Brand : Denison Intermittent Outlet Pressure Port 1 : 280 to 320 bar Rated Speed : 2500 to 6000 RPM Download Catalog Here
The Series V12 is a Bent Axis, Variable Displacement Motor. This renowned series of impressively engineered motors is intended of both open and closed circuits has been specifically designed for the most demanding mobile applications, Hhowever the V12 can also be utilized in a wide variety of other applications. Available in 2 sizes in ISO, SAE and Catridge versions. The small envelope size makes for a clean and cost-effective installation. Parker V14 hydraulic motor series has an operating pressures up
Copyright @ 2025 | PT Besttoflow