F3 DISENGAGEABLE PUMP

The new, disengageable F3 series is a global innovation in mobile hydraulics. By engaging and disengaging the pump from the diesel engine on the fly, you can save substantial amounts of fuel. But you also reduce wear and tear on the pump and minimize the risk of costly downtime and standstills – while also reducing the noise level. All that is required is to press a button on the dashboard, without turning off the engine!

For the average truck running 100,000 kilometres a year, savings can amount to between 200 and 300 litres (45–65 gallons) less diesel, with a corresponding reduction in emissions of greenhouse gases and particulates, all due to the F3 pump being completely disconnectable when not in use. This is a unique, patented characteristic now being launched by Parker.

Download Catalog Here

PDG AIR DRYER

The PDG Series Refrigerated Dryers using refrigeration dryer technology, and is suitable for all compressor types including oil-free. This series dryer treats compressed air efficiently, eliminating the problems associated with wet, untreated air in the compressed air system. When fitted with Parker efficiency compressed air filters. The PDG represents a performance package capable of providing dried, filtered compressed air has a minimum pressure dew-point of 3℃ at a pressure of 7 bar g and clean, free of liquid water.

Technical Specifications

  • Cooling Method:Air
  • Flow Rate (m3/min):7
  • Maximum Operating Pressure (barg):12
  • Pressure Dew Point:+3, +5, +7 Options Available °C
  • Maximum Ambient Temperature:50 °C
  • Maximum Operating Temperature:60 °C
  • Minimum Operating Pressure:3 barg
  • Power Source:230V 1ph 50Hz
  • Port Connection:1 1/2"
  • Width:615 mm
  • Height:791 mm
  • Depth:552 mm
  • Weight:70 kg
  • Connection Type:BSPP-F
  • Refrigerant Type:R407C

Download Catalog Here

STEAM HOSE

Dragon Breath® II Barber Pole Steam Hose is designed for steam applications to 406°F for saturated steam at 261 psi and 450° for superheated steam at 250 psi, Series 7285

Technical Specifications :

  • Hose I.D. (inch): 1/2 - 1 inch
  • Hose Outside Diameter:1 inch, 26.2 mm
  • Hose Reinforcement Material:Multiple Wire Braids
  • Hose Inner Tube Material:Black Chlorobutyl
  • Maximum Operating Temperature:450 °F Superheated Steam, 232 superheated steam °C, 208 Saturated Steam °C, 406 Saturated Steam °F
  • Minimum Bend Radius:7 inch, 178 mm
  • Cover Material:Black & Red EPDM
  • Weight:0.50 lb/ft, 0.75 kg/m
  • Minimum Operating Temperature:-40 °F
  • Maximum Operating Pressure:18 bar, 261 psi
  • Hose Inside Diameter:1/2 inch, 12.7 mm
  • Application:Manufacturing / Industrial
  • Media:Steam
  • Specifications Met:ISO 6134 (Type 2)

Download Catalog Here

GLOBAL CORE HOSE

The newest member of the GlobalCore hose product family, 187 high pressure hydraulic hose is engineered to meet and exceed ISO 18752 performance specifications. A product that’s unmatched in today’s marketplace, GlobalCore 187 hose is the first and only 1,000 PSI constant working pressure hydraulic hose offered in sizes from -8 through -48 (1/2” through 3” inner diameter). Tested to twice the requirements of the ISO 18752 standard, GlobalCore 187 hose is designed to excel in rugged environments and high impulse applications. Like other GlobalCore hoses, high performance 187 hose offers low force to flex and a superior bend radius. Constructed with a synthetic rubber inner tube for a wider range of fluid compatibilities, and reinforced with one- or two-braid steel wire, 187 hose is designed to be a robust and reliable hydraulic hose solution. Choose from three cover options — Standard, Tough, and SuperTough — to match the level of abrasion resistance needed for each application.

Download Catalog Here

Parker P20 & P25

Parker Hannifin’s PGP020 gear pumps and motors are an ideal power for the truck industry. With the ½” gears, it measures only 6” from mounting flange to the port end cover and weighs only 25 lbs.The PGP020 can produce flows up to 29 gpm @ 2400 rpm up to 3000 psi; output to 39 gpm @ 2400 rpm up to 2500 psi. Motors and pumps can be bi-rotational.A variety of drive shafts and mounting styles are offered to meet your needs. Standard features include rigid, one-piece drive shaft and gears and pressure-balanced thrust plated, which assure top efficiency. A rugged, high-strength, cast iron body provides durability.

  • Aluminum or cast iron construction
  • Clockwise or counterclockwise rotation
  • Flows to 98 & 208 GPM per section
  • Journal bearings
  • Available with fluorocarbon seals
  • Available in tandem and piggyback configurations
  • P20 available with integral logic valves

Download Catalog Here

P16 GEAR MOTOR

Parker PGP 500

P16 series Parker gear pumps provide high performance and power density thanks to their semi aluminium construction, which can be found in mobile and truck applications. It is available as a standard pump, clutch pump, tandem pump or as a pump with a priority flow valve including primary circuit relief valve.

  • Cast iron gear plate
  • Clockwise or counterclockwise rotation
  • Flows to 38 GPM per section
  • Journal bearings
  • Available with fluorocarbon seals
  • Available in tandem and piggyback configurations
  • Integral priority valve available
  • Electric clutches available
  • Aluminum flange and cover

Download Catalog Here

Copyright @ 2025 | PT Besttoflow

need help? chat with us