The M5 series is tailored for severe duty applications which require high pressure, high speed and low fluid lubricity.
Drain Port Size : SAE 6 – 9/16″ UNF, M12 X 1,5 Metric thread, 1/4″ BSPP, M18 X 1,5 Metric thread
Continuous Outlet Pressure Port 1 : 260 to 300 bar
Brand : Denison
Intermittent Outlet Pressure Port 1 : 280 to 320 bar
Rated Speed : 2500 to 6000 RPM
Download Catalog Here
The PDG Series Refrigerated Dryers using refrigeration dryer technology, and is suitable for all compressor types including oil-free. This series dryer treats compressed air efficiently, eliminating the problems associated with wet, untreated air in the compressed air system. When fitted with Parker efficiency compressed air filters. The PDG represents a performance package capable of providing dried, filtered compressed air has a minimum pressure dew-point of 3℃ at a pressure of 7 bar g and clean, free of liquid water.
Download Catalog Here
Parker’s D1VW directional control valves are high performance on/off direct operated hydraulic valves. There are 15 solenoid voltage options including DC, DC rectified and true AC voltages. There are 9 basic termination options including DIN, Deutsch, conduit box with wires and conduit box with plug-in coils. The conduit box with plug-in coils also allows for connections including terminal strip, Manaplug (Brad Harrison) and micro connection (M12 connector). D1VW valves are available with other options such as soft shift tubes (4 orifice size options), monitor switches, extended manual over rides and surge suppression diodes. DIN connector and Conduit box connections provide an IP65 (NEMA 4) ingress rating
The D1VW valve is well suited for both the industrial and mobile applications. Painted bodies and Deutsch connectors are offered for tough environment applications.
Download Catalogue Here
Parker P1 Medium Pressure Mobile Hydraulic piston pump for open-circuit mobile applications increase productivity and improve the working environment with a robust cradle-bearing design, wide temperature range, full power thru-drive capability and an optional torque limiter. Featuring unique "ripple chamber" technology, P1 variable displacement pumps minimize pressure pulsations and decrease noise. with lower power consumption and reduced heat, the series ensures reliable performance and efficient control.
Technical Characteristics :
Download Catalog Here
The Parker OIL-X range of die-cast compressed air filters has been designed from the outset to meet the air quality requirements of all editions of ISO8573-1, when validated in accordance with the stringent requirements of ISO12500-1.
An efficient and cost effective manufacturing process is a major factor in maintaining the profitability and growth of your business. Designed using domnick hunter filtration technology, OIL-X filters are designed to not only minimise the use of compressed air and electrical energy in their operation, but also to significantly reduce the operational costs of the compressor by minimising pressure losses.
OIL-X filters incorporate a number of unique and patented design features to minimise differential pressure and provide a filter and element combination where the differential pressure starts low and stays low to maximise energy savings and provide the lowest lifetime costs without compromising air quality.
Download Catalog Here
Parker’s broad selection of pneumatic fittings provide connectivity solutions for a whole range of pneumatic applications. We offer a broad portfolio of products within our pneumatic fittings range and have plenty of material options and device configurations to suit the demands of your project which are easy to install. They also have the capability to withstand a variety of industrial media. Our pneumatic fittings are suitable for use in a wide variety of applications serving across many of today's major industrial markets.
Whether you need airbrake tubing, medical tubing or a particular material, such as PVDF or metric metal tubing, Parker makes it. Parker delivers one of the largest selections of tubing available from one manufacturer. Sizes range from .015” I.D. up to 6” O.D. depending on style.
Download Catalog Here
The EHV bladder accumulator offers a reliable and efficient solution for storing energy under pressure. Utilizing comprehensive tools and resources including an applications database, CAD/CAM, finite element analysis, reliability studies and simulation we have optimized the design and performance of the accumulator. Parker Olaer bladder accumulators are suitable for use in more than 35 countries (all hydraulic accumulators for Europe are CE marked) and they can meet an extensive range of international and industry approvals. Rigorous product testing and continuous product development help to ensure our hydraulic accumulators operate at optimum efficiency and can perform in the most demanding environments. Parker accumulator accessories such as Safety Blocks, Burst Discs and Permanent Charging Sets, can aid the safe installation and operation of the accumulators in any hydraulic system.
Download Catalog Here
The DC590+ Integrator Series DC drive is the latest development of the range which also includes the AC690+ AC drives. It benefits from 30 years experience of designing and manufacturing drives for process line control with dedicated function blocks which simplify the implementation of applications such as sectional drive reels, winder control etc. The function block capabilities offer unparralleled flexibility in both new installations and retrofit applications. A number of common fieldbus communications options enable connectivity to a wide range of popular control networks allowing the DC590+ to be integrated in larger control systems.
Technical characteristics
Download Catalog Here
Copyright @ 2025 | PT Besttoflow
